====== SwissTiming Ares21控制台连接 ======

==== 设备连接 ====

1. 使用RS232转usb线连接电脑\\ 2. 连接电源线并打开

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_0.png?600}}

==== 激活游泳模式 ====

双击”AMM.exe“

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_1.png?600}}

点击”sw:1.15  30.05.02“，然后点击”Activate" button“

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_2.png?600}}

激活成功会显示”SW:1.15 module is Activated”.

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_3.png?600}}

==== 在Ultra Score中设置设备连接 ====

点击设置，然后选择设备设置

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_4.png?600}}

在设备1中选择“SWISSTIMING ARES21 (Swimming)”，软件系统会自动识别出端口号。最后点击 “OK”

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_5.png?600}}

如果软件与设备建立了正确的连接，屏幕左下角的连接状态栏将显示为绿色背景

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_6.png?600}}

点击“设置”按钮以更改模块参数池

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_7.png?600}}

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_8.png?600}}

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_9.png?600}}

{{sports:aquatics:swimming:use_with_swisstiming_ares21:use_with_swisstiming_ares21_10.png?600}}

现在您可以将Ultra Score与Ares21控制台一起使用